Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on a Ford F-250?

Model: Ford F-250 P473 - Years 2011-2016
Part: Bearing

To replace the front wheel bearing on a Ford F-250, lift the vehicle with a jack so that the corresponding front wheel is off the ground. Remove the wheel after loosening the corresponding lug nuts. Then, access the wheel hub, which must be removed from the suspension by unscrewing its bolts. This will allow you to push the bearing out from inside the hub and insert a new one. After installation, reinstall the wheel hub and the corresponding wheel.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Wheel Bearing on the Ford F-250 Super Duty
Replace the Front Wheel Bearing on the Ford F-250 Super Duty
Ford F-250 (1999-2007 / Phn131) Here are step-by-step instructions to remove and replace the front wheel bearing on the Ford F-250 Super Duty. First, open the hood of your vehicle a…
How to Replace the Front Brake Pads on the Ford F-250?
How to Replace the Front Brake Pads on the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To replace the front brake pads on the Ford F-250, lift the vehicle using a jack so that the front wheel is off the ground. Once the wheel is lifted,…
How to Replace the Front Turn Signal Bulb on a Ford F-250
How to Replace the Front Turn Signal Bulb on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the front turn signal bulb on a Ford F-250, remove the screws located at the bottom of the corresponding headlight so it can be completely…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos