Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Front Wheel Bearing on the Ford F-250 Super Duty

Model: Ford F-250 Phn131 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Bearing

See other generations:
Video tutorial

Here are step-by-step instructions to remove and replace the front wheel bearing on the Ford F-250 Super Duty. First, open the hood of your vehicle and begin removing the front wheel; then, unscrew the bolts securing the brake caliper to remove it from the rotor, using leverage on the caliper piston to retract it. At this point, remove the old brake pads and replace them with new ones of the correct type; clean the caliper of any dirt and reassemble everything by following the reverse procedure!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Ford F-250 (1999-2007 / Phn131) .. replace the front fog light bulb on the Ford F-250 Super Duty in simple and quick steps. First, move to the front of your vehicle and unscrew the mounting.. …
Ford F-250 (1999-2007 / Phn131) .. alternator belt on the first generation Ford F-250 Super Duty. First, open the hood of your vehicle and start loosening the belt tensioner using the.. …
Ford F-250 (2011-2016 / P473) To replace the front wheel bearing on a Ford F-250, lift the vehicle with a jack so that the corresponding front wheel is off the ground. Remove the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos