Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on the Ford F-250 Super Duty

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Fog lights

In this video, see how to remove and replace the front fog light bulb on the Ford F-250 Super Duty in simple and quick steps. First, move to the front of your vehicle and unscrew the mounting screws of the fog light assembly; then remove the bulb by pulling it out along with the socket, as shown in the video. At this point, replace the bulb with a new one of the correct type, inserting it into the socket; if necessary, replace the entire fog light assembly by applying the reverse procedure for reassembly!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Wheel Bearing on the Ford F-250 Super Duty
Replace the Front Wheel Bearing on the Ford F-250 Super Duty
Ford F-250 (1999-2007 / Phn131) .. replace the front wheel bearing on the Ford F-250 Super Duty. First, open the hood of your vehicle and begin removing the front wheel; then, unscrew.. …
How to Replace the Front Headlight of the Ford F250 Super Duty P473
How to Replace the Front Headlight of the Ford F250 Super Duty P473
Ford F-250 (2011-2016 / P473) .. how to replace the front headlights of the Ford F250 Super Duty P473. After opening the hood, use a 10mm wrench to remove the 4 bolts securing the front.. …
How to Replace the Serpentine Belt on the Ford F-250 Super Duty
How to Replace the Serpentine Belt on the Ford F-250 Super Duty
Ford F-250 (1999-2007 / Phn131) .. alternator belt on the first generation Ford F-250 Super Duty. First, open the hood of your vehicle and start loosening the belt tensioner using the.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos