Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the Ford F-250 Super Duty

Model: Ford F-250 Phn131 - Years 1999-2007
Part: V-belt

Today, you will see the main steps to remove and replace the serpentine belt or alternator belt on the first generation Ford F-250 Super Duty. First, open the hood of your vehicle and start loosening the belt tensioner using the appropriate wrench. Then, remove the serpentine belt from the various pulleys, as illustrated in the video. At this point, manually insert the new belt, ensuring it is properly seated on all pulleys; to verify this, you can try to turn the engine by hand (with the key), following the video until the end!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Wheel Bearing on the Ford F-250 Super Duty
Replace the Front Wheel Bearing on the Ford F-250 Super Duty
Ford F-250 (1999-2007 / Phn131) .. replace the front wheel bearing on the Ford F-250 Super Duty. First, open the hood of your vehicle and begin removing the front wheel; then, unscrew.. …
How to Replace the Front Fog Light Bulb on the Ford F-250 Super Duty
How to Replace the Front Fog Light Bulb on the Ford F-250 Super Duty
Ford F-250 (1999-2007 / Phn131) .. replace the front fog light bulb on the Ford F-250 Super Duty in simple and quick steps. First, move to the front of your vehicle and unscrew the mounting.. …
Where are the fuses located on the Ford Super Duty?
Where are the fuses located on the Ford Super Duty?
Ford F-250 (2017-2022 / P558) The fuses of the Ford Super Duty are located inside the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it will be po…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos