Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on a Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Light bulb

To replace the rear headlight bulb on a Ford F-250, lower the tailgate to access the screws located on the side. Loosen these screws to remove the headlight from its housing and disconnect the connector at the back. This will allow you to remove the bulb from its connector and replace it with a new part. After connecting the new bulb, insert it back into its housing and secure the headlight.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Tail Light Bulb on a Ford F-250
How to Replace the Rear Tail Light Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the rear tail light bulb on a Ford F-250, lower the tailgate of the truck. This will allow you to loosen the bolt located between the tail…
How to Replace the Front Turn Signal Bulb on a Ford F-250
How to Replace the Front Turn Signal Bulb on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the front turn signal bulb on a Ford F-250, remove the screws located at the bottom of the corresponding headlight so it can be completely…
How to Replace the Turn Signal Bulb on the Ford F-250
How to Replace the Turn Signal Bulb on the Ford F-250
Ford F-250 (2011-2016 / P473) In today's tutorial video, you will see the procedure for removing and replacing the turn signal bulb in the side mirror of the Ford F-250. First, re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos