Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a Ford F-250?

Model: Ford F-250 P558 - Years 2017-2022
Part: Headlight bulb

To replace the headlight bulb on a Ford F-250, open the hood to loosen the screws that secure the front grille. Once removed, unscrew the screws that hold the headlight assembly, disconnecting the connector at the back. When the headlight is completely removed, pull the bulb out from the back and insert a new one. After the replacement, reconnect the headlight and secure it with the appropriate screws.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Fog Light Bulb on the Ford F-250 Super Duty
How to Replace the Front Fog Light Bulb on the Ford F-250 Super Duty
Ford F-250 (1999-2007 / Phn131) In this video, see how to remove and replace the front fog light bulb on the Ford F-250 Super Duty in simple and quick steps. First, move to the fron…
How to Replace the Rear Headlight Bulb on a Ford F-250
How to Replace the Rear Headlight Bulb on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the rear headlight bulb on a Ford F-250, lower the tailgate to access the screws located on the side. Loosen these screws to remove the he…
How to Replace the Rear Tail Light Bulb on a Ford F-250
How to Replace the Rear Tail Light Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the rear tail light bulb on a Ford F-250, lower the tailgate of the truck. This will allow you to loosen the bolt located between the tail…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos