Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Grille on a Ford F250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Grille

In this tutorial, learn how to replace the grille on a Ford F250. First, open the hood and remove the 4 screws above the grille shown at minute 1:05. Next, detach the 4 plastic clips located under the grille; to do this, insert a screwdriver and pry upward. Now you can pull out the grille. At this point, remove the Ford logo by going behind the grille and breaking the plastic around the logo supports. Insert the logo into the new grille and attach the 4 plastic clips to the bottom edge. Now position the grille, ensuring the clips fit properly, and reattach the 4 screws on the top edge.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Grille of the Ford F-250?
How to Remove the Front Grille of the Ford F-250?
Ford F-250 (2017-2022 / P558) To remove the front grille of the Ford F-250, open the hood to access the screws that secure the grille at the top. Once the screws are removed, loos…
How to Replace the Air Filter on a Ford F-250
How to Replace the Air Filter on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the cabin filter on a Ford F-250, open the hood to locate the filter box inside the engine compartment: it is positioned at the front, nea…
How to Replace the Rear Headlight in a Ford F-250
How to Replace the Rear Headlight in a Ford F-250
Ford F-250 (2017-2022 / P558) To replace the rear headlight in a Ford F-250, lower the tailgate to access the side screws securing the headlight. Loosen these screws to extract th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos