Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Bulb on a Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Side marker bulb

To replace the mirror bulb on a Ford F-250, use a screwdriver to pry between the cap and the glass of the mirror. This will allow you to remove the side light from its housing so you can extract the bulb and disconnect it from the connector. Then, install the new bulb into the light, connecting it to the corresponding connector. Finally, snap the light back into its housing, ensuring the bulb is functioning.

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb on the Ford F-250
How to Replace the Turn Signal Bulb on the Ford F-250
Ford F-250 (2011-2016 / P473) In today's tutorial video, you will see the procedure for removing and replacing the turn signal bulb in the side mirror of the Ford F-250. First, re…
How to Replace the Rear Tail Light Bulb on a Ford F-250
How to Replace the Rear Tail Light Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the rear tail light bulb on a Ford F-250, lower the tailgate of the truck. This will allow you to loosen the bolt located between the tail…
How to Replace the Rear Headlight Bulb on a Ford F-250
How to Replace the Rear Headlight Bulb on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the rear headlight bulb on a Ford F-250, lower the tailgate to access the screws located on the side. Loosen these screws to remove the he…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos