Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb on the Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Side marker bulb

In today's tutorial video, you will see the procedure for removing and replacing the turn signal bulb in the side mirror of the Ford F-250. First, remove the small turn signal light from the mirror; to do this, insert a thin screwdriver between the gap of the glass and the plastic to release it, as shown in the video. At this point, remove the socket from the light to replace the bulb inside; then reassemble everything, following the video until the end!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Turn Signal Bulb on a Ford F-250
How to Replace the Front Turn Signal Bulb on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the front turn signal bulb on a Ford F-250, remove the screws located at the bottom of the corresponding headlight so it can be completely…
How to Replace the Mirror Bulb on a Ford F-250
How to Replace the Mirror Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the mirror bulb on a Ford F-250, use a screwdriver to pry between the cap and the glass of the mirror. This will allow you to remove the s…
How to Replace the License Plate Bulb on the Ford F-250?
How to Replace the License Plate Bulb on the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To replace the license plate bulb on the Ford F-250, access the inside of the bumper where the connector for the bulb is located. Once the connector …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos