|
Do it yourself
| |||
| ||||
How to Replace the Outside Rearview Mirror on the Ford F250 Super Duty phn131
Model: Ford F-250
Phn131
- Years 1999-2007
This guide shows how to replace the outside rearview mirror on the Ford F250 Super Duty phn131. First, disconnect the negative battery terminal before proceeding with the replacement. From the door panel on the side you are working on, remove the plastic cover protecting the door's service light and lift the switch panel using a screwdriver or a trim tool, then disconnect the electrical connectors. Remove the triangular plastic panel covering the mirror bolts. Using a 7mm wrench, remove the two bolts located in the service light area and under the switch panel. Lift the inner door panel and disconnect the service light power cable. After lifting the soundproofing panel, disconnect the mirror cable and remove the four 11mm bolts securing the mirror; hold the outer body to avoid damaging the paint. Install the replacement part and reassemble all removed parts in reverse order. Check that the mirror functions correctly.
Updated on 1 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Ford F-250
(2011-2016 /
P473)
In this video, learn how to find the door code on a Ford F250 Super Duty. The code is provided at the time of purchase, along with the vehicle's docu…
Ford F-250
(2017-2022 /
P558)
In this video, see how to turn on and off the heated steering wheel on the Ford F250 Super Duty. If it is on and you need to turn it off, go to the s…
Ford F-250
(2017-2022 /
P558)
This guide shows how to replace the fuel filter on the Ford F250 Super Duty p558. The operation can be performed without lifting the vehicle, given t…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.099
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
