How to Install New Trim on the Front Fenders of a Ford F250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Body

In this tutorial, you will learn how to install new trim on the front fender of a Ford F250. After removing the old trim, clean the entire area around the fender as this will be your work area. Next, move the splash shield after removing the corresponding fastener pins. Now, proceed by inserting the rubber gasket around the upper inner circumference (near the mounting holes) of the new trim. This gasket will prevent water and dirt from entering. Continue by positioning the trim in its place and inserting the fastener pins to hold the replacement. Now, tighten the bolts that will be secured inside the fender. Remember that when positioning the trim, you also need to position the splash shield. Finally, tighten the internal pins of the trim that will hold both the trim and the corresponding plastic splash shield.

Updated on 31 May 2026 by ScegliAuto

This video is currently unavailable

Other guides you may be interested in

- Maintenance and repair on other vehicles

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!

by ScegliAuto

How to Install New Trim on the Front Fenders of a Ford F250

Related tutorials

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

More videos