Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Tail Light Assembly on a Ford F250 P473 to Replace the Reverse Bulb

Model: Ford F-250 P473 - Years 2011-2016
Part: Tail light

This guide shows how to remove the tail light assembly on a Ford F250 P473 to replace the reverse bulb. First, secure the vehicle and open the bed access door. Using a 5/16 wrench, remove the two bolts securing the tail light. With a plastic trim tool and a cloth to avoid damaging the body, pry at the edge of the tail light and pull the piece out, being careful of the wiring. Install the new bulb and reassemble the piece in place. Check the proper functioning of the tail light before hitting the road.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford F-250 (2011-2016 / P473) This guide shows how to replace the front headlights of the Ford F250 Super Duty P473. After opening the hood, use a 10mm wrench to remove the 4 bolt…
Ford F-250 (2011-2016 / P473) This guide shows how to replace the front brakes of the Ford F250 P473. The first step is to remove the wheel bolt cover with a lever. Remove the whe…
Ford F-250 (2011-2016 / P473) Replacing the rear headlight bulbs in a Ford F-250 pickup is very simple. Let's see how to proceed in this tutorial. For this operation, in addition …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos