Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. F-250
    4. : How to replace the front brake disc on Ford F250 p473

Ford F-250 - Video tutorial

Model: Ford F-250 P473 - Years 2011-2016
Part: Brake discs
Operation: How to replace the front brake disc on Ford F250 p473

The guide shows how to perform the replacement of the front brakes of the Ford F250 p473. The first step is to remove the wheel bolt cover with a lever. Remove the wheel with a 22mm wrench. With a 16 mm wrench, remove the upper bolt of the caliper and then the lower one; remove the caliper and set it aside. Remove the brake pads and 21mm bolts that hold the caliper holder in place. Remove the brake disc; if necessary, hit it with a hammer to facilitate its exit. Clean off dirt and rust residues. After cleaning the new brake disc, insert it into place and secure all the elements removed so far. Check for proper brake operation before taking the road.


Posted on 17 August 2022 by ScegliAuto



How to replace the headlight on Ford F250 Super Duty p473
Ford F-250 (2011-2016 / P473) The guide shows how to replace the headlights of the Ford F250 Super Duty p473. After opening the bonnet, with a 10mm wrench, unscrew the 4 fixing bo
How to remove the rear light of the Ford F250 p473 to replace the reverse light bulb
Ford F-250 (2011-2016 / P473) The guide shows how to disassemble the rear light assembly of the Ford F250 p473 in order to replace the reverse light bulb. As a first step, it is n
How to replace the front brake pads of the Ford F-250
Ford F-250 (2011-2016 / P473) We see in this video the procedure necessary for the disassembly and replacement of the front brake pads of the Ford F-250. First we lift the car on

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos