Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Ford F-250

Model: Ford F-250 P473 - Years 2011-2016
Part: Brake pads

In this video, see the procedure for removing and replacing the front brake pads on the Ford F-250. First, lift the vehicle at the front and remove the wheel; then, remove the brake caliper by prying on the piston and unscrewing the mounting bolts located on the back of the caliper, as shown in the video. At this point, remove and replace the brake pads, cleaning off any dirt first; then, reassemble everything, also replacing the front brake rotor.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Front Brake Pads on a Ford F-250
Replace the Front Brake Pads on a Ford F-250
Ford F-250 (2017-2022 / P558) In today's tutorial video, you will see the instructions needed to remove and replace the front brake pads on a Ford F-250. First, lift the vehicle a…
How to Replace the Front Brake Pads on the Ford F-250?
How to Replace the Front Brake Pads on the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To replace the front brake pads on the Ford F-250, lift the vehicle using a jack so that the front wheel is off the ground. Once the wheel is lifted,…
How to Replace the Rear Brake Pads on the Ford F-250?
How to Replace the Rear Brake Pads on the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To replace the rear brake pads on the Ford F-250, lift the vehicle so that the wheel corresponding to the brake being replaced is off the ground. Thi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos