Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Ford F-250?

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Brake pads

To replace the rear brake pads on the Ford F-250, lift the vehicle so that the wheel corresponding to the brake being replaced is off the ground. This will allow you to loosen the bolts securing the wheel and remove it completely. At this point, loosen the screws that secure the brake caliper to the brake assembly. By detaching the caliper, you can extract the old pads from inside; once the old pads are removed, insert the new ones and reattach the caliper and wheel.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on the Ford F-250
How to Replace the Front Brake Pads on the Ford F-250
Ford F-250 (2011-2016 / P473) In this video, see the procedure for removing and replacing the front brake pads on the Ford F-250. First, lift the vehicle at the front and remove t…
Replace the Front Brake Pads on a Ford F-250
Replace the Front Brake Pads on a Ford F-250
Ford F-250 (2017-2022 / P558) In today's tutorial video, you will see the instructions needed to remove and replace the front brake pads on a Ford F-250. First, lift the vehicle a…
How to Replace the Front Brake Pads on the Ford F-250?
How to Replace the Front Brake Pads on the Ford F-250?
Ford F-250 (1999-2007 / Phn131) To replace the front brake pads on the Ford F-250, lift the vehicle using a jack so that the front wheel is off the ground. Once the wheel is lifted,…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos