Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" light on a Ford F250?

Model: Ford F-250 P558 - Years 2017-2022
Part: Service warning light

To reset the "Service" light on a Ford F250, start the instrument panel without starting the vehicle. Use the buttons on the steering wheel to navigate the onboard computer menu. Look for and select the maintenance section. Once found, follow the instructions displayed on the screen to complete the reset. Hold down the indicated button until the reset is complete and the light turns off. This procedure ensures that the maintenance monitoring system of your F250 is up to date and that the service reminder has been properly reset. Make sure to perform this procedure after completing the manufacturer's recommended service to maintain optimal vehicle performance.

Posted on 20 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Tail Light Assembly on a Ford F250 P473 to Replace the Reverse Bulb
How to Remove the Tail Light Assembly on a Ford F250 P473 to Replace the Reverse Bulb
Ford F-250 (2011-2016 / P473) This guide shows how to remove the tail light assembly on a Ford F250 P473 to replace the reverse bulb. First, secure the vehicle and open the bed ac…
Fuse diagram of the 1999 Ford F-250
Fuse diagram of the 1999 Ford F-250
Ford F-250 (1999-2007 / Phn131) In the video at the bottom of the article, the fuse diagram and the location of the fuse box for the 1999 Ford F250 are shown. You can pause the vide…
How to Turn On and Off the Heated Steering Wheel on Ford F250 Super Duty
How to Turn On and Off the Heated Steering Wheel on Ford F250 Super Duty
Ford F-250 (2017-2022 / P558) In this video, see how to turn on and off the heated steering wheel on the Ford F250 Super Duty. If it is on and you need to turn it off, go to the s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos