Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Turn Signal Bulb on a Ford F-250

Model: Ford F-250 Phn131 - Years 1999-2007
Part: Side marker bulb

To replace the front turn signal bulb on a Ford F-250, remove the screws located at the bottom of the corresponding headlight so it can be completely pulled out of its housing. After removing the headlight, you can extract the bulb inside by disconnecting it from its connector. Once the old bulb is disconnected, connect the new one by inserting it into the headlight. Then, secure the headlight with the appropriate screws at the bottom.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Turn Signal Bulb on the Ford F-250
How to Replace the Turn Signal Bulb on the Ford F-250
Ford F-250 (2011-2016 / P473) In today's tutorial video, you will see the procedure for removing and replacing the turn signal bulb in the side mirror of the Ford F-250. First, re…
How to Replace the Headlight Bulb on a Ford F-250?
How to Replace the Headlight Bulb on a Ford F-250?
Ford F-250 (2017-2022 / P558) To replace the headlight bulb on a Ford F-250, open the hood to loosen the screws that secure the front grille. Once removed, unscrew the screws that…
How to Replace the Mirror Bulb on a Ford F-250
How to Replace the Mirror Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the mirror bulb on a Ford F-250, use a screwdriver to pry between the cap and the glass of the mirror. This will allow you to remove the s…

How to Open the Fuel Filler Cap of the 2020 Hyundai Tucson

The 2020 Hyundai Tucson has two methods for opening the fuel filler flap. Both methods can only be used if the key has been removed from the ignition and the engine is off. The first method involves removing the key from the ignition and keeping all the car locks open, then go to the flap and press it. This will open the flap. The second method is to stay in the car, remove the key from the ignition, and then press the fuel filler release button located on the left door.

Watch the video!


by ScegliAuto

More videos