Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Bulb on the Ford F-250?

Model: Ford F-250 Phn131 - Years 1999-2007
Part: License plate light

To replace the license plate bulb on the Ford F-250, access the inside of the bumper where the connector for the bulb is located. Once the connector is disconnected, push the bulb from the inside out to release it from its housing. This way, you can connect the new bulb to the connector and secure it in the housing. You can perform the same operation for the other license plate bulb, which will be located on the opposite side.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Mirror Bulb on a Ford F-250
How to Replace the Mirror Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the mirror bulb on a Ford F-250, use a screwdriver to pry between the cap and the glass of the mirror. This will allow you to remove the s…
How to Replace the Rear Headlight Bulb on a Ford F-250
How to Replace the Rear Headlight Bulb on a Ford F-250
Ford F-250 (1999-2007 / Phn131) To replace the rear headlight bulb on a Ford F-250, lower the tailgate to access the screws located on the side. Loosen these screws to remove the he…
How to Replace the Rear Tail Light Bulb on a Ford F-250
How to Replace the Rear Tail Light Bulb on a Ford F-250
Ford F-250 (2011-2016 / P473) To replace the rear tail light bulb on a Ford F-250, lower the tailgate of the truck. This will allow you to loosen the bolt located between the tail…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos