Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a 2015 Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Cabin air filter

In the following video, you will see how to change the cabin filter on the Ford Fiesta Mk6. This is a very simple, quick, and intuitive procedure that requires little time. The first step is to locate the position of the climate filter. For the Ford Fiesta Mk6, this filter is positioned under the dashboard on the passenger side. If in doubt, consult the vehicle manual. At this point, position yourself on the passenger side and begin removing the screws of the cover located at the bottom. Carefully remove the cover and then the flap that leads to the filter. Now, simply pull out the filter, replace it with a new one, and refit the cover in its original position.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Procedure to Replace the Cabin Filter on a Ford Fiesta
Procedure to Replace the Cabin Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you can see how to remove the cabin filter on a Ford Fiesta. To perform this cabin filter replacement, you need to remove the…
Replacing the Cabin Filter on a Ford Fiesta
Replacing the Cabin Filter on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, let's see how to replace the cabin filter on a sixth-generation Ford Fiesta. Start by removing the protective panel under the passenger side g…
How to Replace the Cabin Filter on the Ford Fiesta 2011
How to Replace the Cabin Filter on the Ford Fiesta 2011
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Periodically replacing the cabin air filter inside your Ford Fiesta Mk6 (2011) is very important, especially if you want to avoid unpleasant odours w…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos