Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key for the Keyless Remote of a Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

In today's tutorial, you will learn how to replace the battery in the keyless remote for the Fiesta. Obtain a CR 2032 button battery; in any case, check the owner's manual for the correct model.

Take the remote, press the release button on the remote cover, remove the shell, and take out the spare key. Using a flathead screwdriver, pry on the tab to separate the two parts of the remote. Now you can remove the old battery and install the new one. Reassemble the two shells, the emergency key, and the cover cap.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery on a Ford Fiesta
How to Replace the Remote Battery on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's video, we can see the step-by-step procedure to replace the (CR2032) battery of the Keyless remote for a sixth-generation Ford Fiesta. Sta…
How to Replace the Remote Battery of a Ford Fiesta?
How to Replace the Remote Battery of a Ford Fiesta?
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) To replace the remote battery of a Ford Fiesta, use a tool like a screwdriver to lever open the slot above the manufacturer's logo: this will allow y…
How to Change the Key Remote Battery in a Ford Fiesta
How to Change the Key Remote Battery in a Ford Fiesta
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To change the battery of the remote control for a Ford Fiesta, follow a few simple steps. Press the side buttons on the casing: the mechanical key wi…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What does the wrench light on my Ford Fiesta mean? Read answer
    • Fiesta 2008-2017 - What does the orange light with a wrench mean on the Ford Fiesta? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos