Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Ford Transit Mk6

Model: Ford Transit MK 6 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Air filter

See other generations:
Video tutorial

This guide shows how to replace the air filter on a Ford Transit Mk6. Open the bonnet, and on the left side of the compartment, you will find the air filter housing. Disconnect the air hose and the vacuum tube from the box; disconnect the water drainage tube from the windscreen.

Open the two clips on the filter box and remove the cover. Pull out the filter block and clean the housing.

Insert the new filter element and refit everything in position. Check the correct installation of the part before hitting the road.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on Ford Transit (2000-2006)
Replacing the Cabin Air Filter on Ford Transit (2000-2006)
Ford Transit (2000-2006 / MK 6) In this brief video, we will show how to remove and replace the cabin air filter on a Ford Transit MK6, from 2000 to 2006; this case refers to the Ca…
How to Replace the Cabin Air Filter on a 2021 Ford Transit
How to Replace the Cabin Air Filter on a 2021 Ford Transit
Ford Transit (2014-2024 / MK 8) The procedure to replace the cabin air filter in your 2021 Ford Transit is straightforward. Simply follow the steps in this guide. Before starting, e…
Replacing the Diesel Filter on Ford Transit 2.4 DuraTorq
Replacing the Diesel Filter on Ford Transit 2.4 DuraTorq
Ford Transit (2000-2006 / MK 6) In this video tutorial, see how to remove and replace the diesel filter on a Ford Transit 2.4 DuraTorq in simple and quick steps. First, open and lif…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos