Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Retrieve the Keyless Entry Code for the 2013-2015 Ford Fusion DIY

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Key

The video shows how to retrieve the unlock code for a Ford Fusion North America. It can happen that after replacing the battery, the car asks for the code again. There are usually two ways to obtain it: call Ford support and request the code by providing all the necessary information typically found in the manual, or look for the code on the fuse box. Use a mirror because the box you need to unscrew is located just under the driver's side. Use a 10 mm wrench to remove it. The five-digit code is written on the back of the box.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Ford Fusion located?
Where is the fuse box of the Ford Fusion located?
Ford Fusion North America (2013-2020 / MK 2) If you are looking for the fuse box of your Ford Fusion, all you have to do is pay attention to the procedure described in the following guide and fo…
How to Change the Key Fob Battery for a Ford Fusion
How to Change the Key Fob Battery for a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will learn how to change the battery in the key fob of a Ford Fusion. Before you start, make sure you have the correct replacem…
How to Replace the Key Fob Battery of the Ford Fusion?
How to Replace the Key Fob Battery of the Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) As shown in this tutorial, replacing the key fob battery of the Ford Fusion is an extremely simple and quick operation. First, obtain a replacement C…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos