Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Fob Battery for a Ford Fusion

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Key

In this tutorial, you will learn how to change the battery in the key fob of a Ford Fusion. Before you start, make sure you have the correct replacement battery, which is a flat CR 2450 model rated at 3 V. First, take the key fob and extract the metal key from inside by pulling on the upper end. Next, use the key itself to pry open the fob casing; you will then have access to the battery compartment and can proceed to remove and replace the battery.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Ford Fusion Key Fob?
How to Open the Ford Fusion Key Fob?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to open the Ford Fusion key fob, a very simple and quick operation, for example, when you need to replace the batt…
How to Replace the Key Fob Battery on a Ford Fusion?
How to Replace the Key Fob Battery on a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to replace the key fob battery on a Ford Fusion, a very simple and quick operation. For this, you will need a smal…
How to replace the battery of the Ford Fusion 2 remote control
How to replace the battery of the Ford Fusion 2 remote control
Ford Fusion North America (2013-2020 / MK 2) When the remote control of your second edition Ford Fusion suddenly stops working, don't worry because in most cases the problem is caused by a dead …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos