Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on a Ford Fusion?

Model: Ford Fusion North America MK 2 - Years 2013-2020
Part: Key

Replacing the key fob battery on a Ford Fusion, as shown in this tutorial, is an extremely simple and inexpensive task. You will need a replacement CR2450 battery and, if necessary, a small flathead screwdriver. First, press the button located on the bottom edge and remove the emergency key, then pry open the cover along the indicated slot. Finally, remove the old battery and insert the replacement, ensuring the correct orientation with the positive side facing you.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery on a Ford Fusion?
How to Replace the Key Fob Battery on a Ford Fusion?
Ford Fusion North America (2013-2020 / MK 2) .. In this tutorial, you will see how to replace the key fob battery on a Ford Fusion, a very simple and quick operation. For this, you.. …
How to replace the battery of the Ford Fusion 2 remote control
How to replace the battery of the Ford Fusion 2 remote control
Ford Fusion North America (2013-2020 / MK 2) When the remote control of your second edition Ford Fusion suddenly stops working, don't worry because in most cases the problem is caused by a dead …
How to Open the Ford Fusion Key Fob?
How to Open the Ford Fusion Key Fob?
Ford Fusion North America (2013-2020 / MK 2) In this tutorial, you will see how to open the Ford Fusion key fob, a very simple and quick operation, for example, when you need to replace the batt…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos