Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Pillars in a Ford Flex?

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

Video tutorial

In the video, you can see how to easily remove the door pillars in a 2014 Ford Flex. To perform this operation, you need to partially remove (not completely, but at least pull away a bit at the top) the door panel, then unscrew the screws and bolts that hold it in place.

Pull the panel away and disconnect the various connectors behind it. The interior door handle also needs to be removed, as well as the window seal and any additional chrome trim installed above.

From inside the door, disconnect the electrical connector of the pillar, which is now free and can be removed from the vehicle.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the Ford Flex
How to Replace the Key Battery in the Ford Flex
Ford Flex (2009-2019 / MK 1) In this new mini guide about the Ford Flex, we will discover how to replace the key battery. First, locate the small button on the bottom of the cove…
How to Replace the Key Battery for the Ford Flex
How to Replace the Key Battery for the Ford Flex
Ford Flex (2009-2019 / MK 1) In this mini guide, you will learn how to easily and safely replace the battery in your Ford Flex key. First, locate the small button on the back of …
How to Replace the Rear Headlight Bulbs on a Ford Flex?
How to Replace the Rear Headlight Bulbs on a Ford Flex?
Ford Flex (2009-2019 / MK 1) In this tutorial, you will see how to replace the rear headlight bulbs on a Ford Flex, a very simple and quick operation. Before doing this, ensure t…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos