Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight from a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight

To remove the front headlight from the Ford Focus, open the bonnet to access the two bolts securing the light unit from the top. Once these bolts are removed, you can slide the headlight out of its housing, disconnecting the connector inside. This way, the piece can be completely removed, allowing the new headlight to be connected to the connector and inserted back into its housing. Finally, screw the bolts back in at the top, and you can close the bonnet.

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Bulb on Ford Focus Zetec
Ford Focus (2004-2011 / MK 2, Focus 2) Are the front headlight bulbs due for a change? Here’s how to remove the front headlight bulbs on a Focus. Lift the cover bonnet, locate the front he…
How to replace the front headlight bulb of the 2016 Ford Focus
How to replace the front headlight bulb of the 2016 Ford Focus
Ford Focus (2011-2018 / MK 3) If you own a Ford Focus Mk3 (year 2016) and want to replace one of the bulbs in the front headlight on your own, then all you have to do is carefully…
How to disassemble the front headlight of the Ford Focus
How to disassemble the front headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) The following steps will show us how to disassemble and replace the front headlight of the Ford Focus, following the instructions below. First, we op…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos