Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Wheel Bolt Covers on the Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

See other generations:
Video tutorial

In this short tutorial, you will see how to remove the wheel bolt covers on the Ford Focus, a necessary operation if you need to remove the wheel. These elements can be quite difficult to remove due to dirt accumulation or rust formation.

Start by positioning yourself in front of the wheel in question, then place a flat-head screwdriver on the cover and tap it with a hammer until it punctures. Next, bend the screwdriver, insert it deeper, and lever it out to dislodge the cap.


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Replace the Seatbelt on a Ford Focus
How to Replace the Seatbelt on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the seatbelt on a Ford Focus, remove the seals from the front and rear doors. Next, using a socket spanner, loosen the bolt at the bottom …
How to Replace the Front Brake Pads on a Ford Focus MK1
How to Replace the Front Brake Pads on a Ford Focus MK1
Ford Focus (1998-2004 / MK 1) In this video, see how to replace the brake pads on a Ford Focus MK1: first, open the bonnet and remove the cap from the brake fluid reservoir, then …
How to Replace the External Wing Mirror on a Ford Focus
How to Replace the External Wing Mirror on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the front door of your Ford Focus. Begin by lowering the window, then unclip and remove the covers near the wing mirror. N…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos