Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Pollen Filter

Model: Ford Fiesta MK V, MK 5, Fiesta 5 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Cabin air filter

See other generations:
Video tutorial

The pollen filter on the Ford Fiesta is located low down, on the right side in front of the passenger. To access the work area more easily, it is advisable to remove the carpet protection behind which the filter is located, as well as the front door of the glove compartment.

To facilitate the removal of the filter, there is a simple trick that involves pressing it centrally and pulling it out using the 'spring-back' effect. The video was made on a Ford Fiesta ST, but it is likely applicable as a reference for other Fiesta models and Ford Focus.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

How do you reset the Service light in the Ford Fiesta 1.4 tdci?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) The work carried out in the attached video falls fully within the list of scheduled and regular maintenance tasks for the Ford Fiesta 1.4 tdci. This …
How to Replace the Air Filter on the Ford Fiesta 6
How to Replace the Air Filter on the Ford Fiesta 6
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Replacing the air filter on a Ford Fiesta 6 is a simple and quick procedure that you can do independently. Start by opening the bonnet and removing t…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) The cabin air filter is located in the engine compartment, just below the windscreen, on the passenger side. Start by opening the front bonnet to acc…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos