Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Fog Light Bulb

Model: Ford Focus MK 1 - Years 1998-2004
Part: Light bulb

To replace the bulb of the rear fog light located at the bottom of the bumper, it is necessary to remove it from its housing: along the lower edge of the bumper, there is a clip for the rear fog light, and it is sufficient to press this clip to extract the light. At this point, release the bulb holder by turning it anti-clockwise and proceed with replacing the bulb (bayonet fitting); check the bulb's correct operation before repositioning the bulb holder and then the fog light in its housing.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Rear Brake Light Bulb
Replacement of Rear Brake Light Bulb
Ford Focus (1998-2004 / MK 1) To replace the rear brake light bulb, you need to remove the light unit: open the boot and unscrew the three plastic nuts that secure the light to th…
How to replace the rear headlight bulb of the Ford Focus
How to replace the rear headlight bulb of the Ford Focus
Ford Focus (2004-2011 / Focus 2, MK 2) Today we will explain how to replace the rear headlight bulb of the Ford Focus. First, open the trunk of the vehicle and then unscrew the screw that …
How do you replace the rear headlight bulb of the Ford Focus?
How do you replace the rear headlight bulb of the Ford Focus?
Ford Focus (1998-2004 / MK 1) The replacement of the rear headlight bulb of the Ford Focus is carried out by opening the rear hatch, so that it is possible to access the screw loc…

Other guides you may be interested in

Remove a Rear Light from a Volkswagen Touran

Remove a rear light from a Volkswagen Touran to replace the damaged bulbs. Open the boot lid, and using a lever, remove the plastic cover of the rear light. Unscrew the securing bolts located at the side of the rear light with a screwdriver (using a socket spanner or screwdriver with a bit). Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, reassemble the light and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos