Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change a light bulb on a Ford Focus MK2

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Light bulb

We can see in this video how to change the bulb of a Ford Focus MK2: make sure that the headlight switch is turned off; the headlight is held in place by three 10mm bolts, and we will use a flathead screwdriver, but first we need to remove the grille by removing the four clips that hold it in place, using a plastic spatula, then using a 10mm socket wrench, remove the bolts holding the headlight. Now, using the spatula, remove the headlight assembly from its housing, but be careful of the electrical connections at the back; remove the electrical connector of the bulb that needs to be replaced, by turning the cap counterclockwise. Remember to never touch the bulb with bare hands. Replace the bulb by rotating it counterclockwise and reposition the assembly. Replace the bolts and then the clips of the grille. Job done.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fog light bulb of a Ford Focus MK2
How to replace the fog light bulb of a Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, we will see how to change the fog light bulb of a Ford Focus MK2. Instead of removing the fog light trim, we will remove the front opt…
Replacing the Mirror Bulb on Ford Focus
Replacing the Mirror Bulb on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will learn how to change the bulb in the external rear-view mirror of the Ford Focus mk3. To do this, first detach the external tr…
How to replace the bulb of the interior light of the Ford Focus
How to replace the bulb of the interior light of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show us how to disassemble and replace the bulb of the interior light fixture of the Ford Focus. First of all, we get on boa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos