Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the headlight bulb on Ford Focus 3

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Headlight bulb
Operation: How to replace the headlight bulb on Ford Focus 3

It takes just a few minutes to replace the headlight bulb on your Ford Focus third series (year 2011-2018). Furthermore, if you follow the instructions described in the following mini guide to the letter, you will complete the entire operation without any difficulty. Before starting, make sure you have parked your car safely and turned it off completely. Immediately afterwards, lift the front hood and remove the headlight by unscrewing the two screws present with a Phillips screwdriver. Remove the protective cap and proceed with the replacement of the old bulb with the new one. Finally, reassemble the lighthouse.


Posted on 12 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the headlight bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos