Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Ford Fiesta 7?

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023

If you want to find out where the OBD port of your Ford Fiesta seventh series (2017-2022) is located, read this mini guide carefully and follow the steps described. First, enter the cabin and ensure the car is completely off. Next, locate the small compartment at the far left of the dashboard and remove it by hand. Once done, you will finally have access to the OBD port you were looking for (marked by a white colour). This way, you can connect any diagnostic tool.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Ford Fiesta 6 located?
Where is the OBD port of the Ford Fiesta 6 located?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If you are looking for the OBD port inside the cabin of your Ford Fiesta Mk6, all you have to do is follow the steps described in our new guide. Firs…
Where is the OBD2 port of the Ford Fiesta 6?
Where is the OBD2 port of the Ford Fiesta 6?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To easily locate the OBD2 port inside the cabin of your Ford Fiesta Mk6, just pay attention to the various steps described below and apply them in th…
Where is the OBD port of the Ford Fiesta 2010 located?
Where is the OBD port of the Ford Fiesta 2010 located?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) If you want to use an electronic diagnostic tool on your Ford Fiesta Mk6 (year 2010) but you don't know where the OBD port is located, then all you h…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos