Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Ford F-150

Model: Ford F-150 MK 13 - Years 2015-2020
Part: Cabin air filter

To replace the cabin air filter on this vehicle DIY, follow the instructions in this description and refer to the video for assistance. First, access the cabin from the passenger side and open the glove compartment. Disconnect the side support pins to fully lower it. Behind it, you will find the filter housing. To access it, remove the upper plastic panel secured with 2 screws, and disconnect the clip located behind it. Then, pull the access door to the filter compartment towards you, remove the old filter, and replace it with the new one. Next, reattach the access door, reinstall the plastic panel, reconnect the rear clip, and reposition the glove compartment.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in a Ford F-150
How to Replace the Cabin Air Filter in a Ford F-150
Ford F-150 (2015-2020 / MK 13) This guide will show you how to remove and replace the cabin air filter in a Ford F-150 in simple and quick steps. First, get inside the vehicle on t…
How to Replace the Air Filter on a Ford F-150
How to Replace the Air Filter on a Ford F-150
Ford F-150 (1997-2004 / MK 10) Replacing the air filter is a crucial task to protect your Ford F-150's engine from overheating and potential power loss. In this mini guide, you wil…
How to Replace the Cabin Air Filter on the Ford F-150?
How to Replace the Cabin Air Filter on the Ford F-150?
Ford F-150 (2009-2014 / MK 12) To replace the cabin air filter on the Ford F-150, open the glove compartment of the front passenger side to disengage the internal retaining pins of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos