Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

Below are the instructions that will allow you to remove and replace the front headlight and its bulbs on the Ford C-Max. First, open the bonnet of your car and start unscrewing the fixing screws located at the top of the headlight using a Torx screwdriver; then disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point, remove the plastic caps to access the bulbs, replacing them with new ones; then install the new headlight unit, applying the reverse procedure!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
Removing the Bulbs from the Front Headlight on a Ford C Max
Removing the Bulbs from the Front Headlight on a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the blown bulbs from the front headlight on a Ford C Max, start by removing the front headlight. Open the bonnet by pulling the bonnet relea…
How to remove the front headlight of the Ford C-Max.
How to remove the front headlight of the Ford C-Max.
Ford C Max (2003-2010 / MK 1) This brief guide will show us the steps to disassemble and possibly replace the front headlight of the Ford C-Max. First, let's open the vehicle's ho…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos