Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Headlight Bulbs on Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it. Remove the headlight (unscrew the securing screws).

Remove the inspection cover from the back of the headlight.

Pull the bulb holders out of the headlight and extract the damaged bulbs. Fit the new bulbs and insert the bulb holder back into the headlight housing.

After fitting the headlight cover, you can test the lights. Refit the headlight to the front of the car.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Ford C-Max
How to Replace the Front Headlight Bulbs on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Learn how to replace the front headlight bulbs on a Ford C-Max: open the front bonnet by pulling the lever located at the bottom right of the dashboa…
How to Replace the Front Headlight Bulbs on a Ford C Max
How to Replace the Front Headlight Bulbs on a Ford C Max
Ford C Max (2003-2010 / MK 1) How do you replace the front headlight bulbs on a Ford C Max? Follow this guide: open the bonnet of the engine compartment, remove the plastic inspec…
Removing the Bulbs from the Front Headlight on a Ford C Max
Removing the Bulbs from the Front Headlight on a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the blown bulbs from the front headlight on a Ford C Max, start by removing the front headlight. Open the bonnet by pulling the bonnet relea…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos