Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the 2014 Ford C Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

Today we will explain how to replace the front headlight bulb of the 2014 Ford C Max. To perform the headlight replacement, we have the front hood and immediately after using a torx key, we unscrew the screws on the top cover of the headlight. After removing the top cover, we remove the dome light cap and press the sides of the bulbs to remove it. Insert the new bulb inside the headlight and close the dome light cap. Mount the top cover and get into the vehicle to turn on the front headlight lights to test their operation.


Posted on 11 December 2024 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb of a Ford C-Max?
How to Replace the Front Headlight Bulb of a Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the front headlight bulb of a Ford C-Max, open the bonnet to access the screws that secure the headlight from the top. Once these screws a…
How to replace the front headlight bulb of the Ford C Max
How to replace the front headlight bulb of the Ford C Max
Ford C Max (2010-2019 / MK 2) Today we will explain how to replace the front headlight on the second generation Ford C Max. Using a Torx key, T30, we unscrew the screws located on…
Replacing the front headlight bulb on the Ford C-Max MK2
Replacing the front headlight bulb on the Ford C-Max MK2
Ford C Max (2010-2019 / MK 2) In this video, we will see the procedure to remove and replace the front headlight bulb on the Ford C-Max second series, from 2014, in simple steps. …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos