Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulbs of a Ford C-Max II

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

In this video we see how to change all the front lights bulbs of a Ford C-Max II, so position lights, high beams, low beams and turn signals. The flexible bumper gives us the possibility to access the front part quite easily, where we find a screw to remove, while in the rear part, we will have to remove a couple of fixing screws on the bodywork and one inside.

By lifting up the headlight unit from the rear, we reach to disconnect the electrical connectors and once removed, we start to open the covers of the various bulbs, starting from the low beams, then the turn signal bulb, the turn signal - which is in a rather inconvenient position - inside the high beam container.


Posted on 12 July 2025 by ScegliAuto


Related tutorials

Guide to Removing the Front Headlamp of the Ford C-Max
Guide to Removing the Front Headlamp of the Ford C-Max
Ford C Max (2003-2010 / MK 1) This guide illustrates the main steps for removing and replacing the front headlamp and its bulbs on the Ford C-Max. First, open the bonnet of the ve…
How to Remove the Front Headlight of the Ford C-Max
How to Remove the Front Headlight of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Below are the instructions that will allow you to remove and replace the front headlight and its bulbs on the Ford C-Max. First, open the bonnet of y…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos