Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Front Headlamp of the Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

This guide illustrates the main steps for removing and replacing the front headlamp and its bulbs on the Ford C-Max. First, open the bonnet of the vehicle and start unscrewing the fixing screws located at the top of the headlamp unit; also unscrew the screw located inside the hole, as shown in the video.

At this point, disconnect the electrical connector of the bulbs located at the rear, releasing and completely removing the front headlamp; replace the bulbs if necessary, applying the reverse procedure for reassembly!


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Remove the Headlamp on a Ford C Max
How to Remove the Headlamp on a Ford C Max
Ford C Max (2010-2019 / MK 2) Replace the front headlamp on a Ford C Max. Open the bonnet by pulling the release lever and secure it. Unscrew the securing screws above the headlam…
How to Remove the Front Headlamp of the Ford C-Max
Ford C Max (2010-2019 / MK 2) This tutorial video outlines all the necessary steps to replace the front headlamp of a second-generation Ford C-Max, specifically produced from 2013…
How to Replace the Indicator Bulb of the Front Headlamp on a Ford C-Max
How to Replace the Indicator Bulb of the Front Headlamp on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before you can start, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the headlamp to the vehicle. Next, …

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos