How to Remove the Front Headlamp of the Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:

This video is currently unavailable

This tutorial video outlines all the necessary steps to replace the front headlamp of a second-generation Ford C-Max, specifically produced from 2013 to 2018. First, lift the bonnet of the vehicle. Next, unscrew the screws of the radiator grille, the upper plastic cover of the engine bay, and finally the screws of the headlamp to be replaced.

Once done, disconnect all the various connectors and bulbs from the back of the headlamp to remove it completely from the vehicle. Now, simply fit a new headlamp by following the reverse procedure.

Updated on 26 August 2026 by ScegliAuto

Other guides you may be interested in

Grille - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Radiator - Maintenance and repair on other vehicles

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!

by ScegliAuto

How to Remove the Front Headlamp of the Ford C-Max

Related tutorials

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

More videos