Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlight of the Ford C-Max

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

In this video, you will discover step-by-step instructions on how to remove and replace the front headlight of the Ford C-Max in simple steps. First, open the bonnet of the vehicle and start unscrewing the fixing screws located at the top of the front headlight, also removing the clips; then disconnect the electrical connector of the bulbs located at the rear, as shown in the video.

At this point, detach and gently remove the headlight unit, replacing it with a new one if necessary; replace the bulbs if needed, and finally reassemble the front headlight!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
How to remove the front headlight of the Ford C-Max.
How to remove the front headlight of the Ford C-Max.
Ford C Max (2003-2010 / MK 1) This brief guide will show us the steps to disassemble and possibly replace the front headlight of the Ford C-Max. First, let's open the vehicle's ho…
Removing the Bulbs from the Front Headlight on a Ford C Max
Removing the Bulbs from the Front Headlight on a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the blown bulbs from the front headlight on a Ford C Max, start by removing the front headlight. Open the bonnet by pulling the bonnet relea…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos