Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Bulbs from the Front Headlight on a Ford C Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Headlight bulb

Removing the blown bulbs from the front headlight on a Ford C Max, start by removing the front headlight. Open the bonnet by pulling the bonnet release lever and secure it. Unscrew the securing screws located above the headlight using a socket wrench or battery-powered screwdriver. Detach the headlight from the bumper. Remove the bulb holders from the headlight and extract the headlight from the vehicle body. Fit the new headlight with new bulbs if damaged (always ensure the type and size are correct) and insert the headlight into its housing. Screw in the screws above the headlight. Test the correct functioning of the lights by turning on the ignition.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…
How to Replace the Front Headlight Bulbs on a Ford C Max
How to Replace the Front Headlight Bulbs on a Ford C Max
Ford C Max (2003-2010 / MK 1) How do you replace the front headlight bulbs on a Ford C Max? Follow this guide: open the bonnet of the engine compartment, remove the plastic inspec…
Guide to disassembling the front headlight of the Ford C-Max
Guide to disassembling the front headlight of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Today's guide will show us the main steps useful for disassembling and replacing the front headlight and its bulbs of the Ford C-Max. First, we open …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos