Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the front hood lock of the Ford CMax MK2

Model: Ford C Max MK 2 - Years 2010-2019
Part: Body

Let's see how to proceed to replace the key lock of the front hood of the Ford C-Max. With the hood open, remove the grille above the radiator by unscrewing the screws that hold it in place, remove the old lock with the flexible cable, unscrew the two screws that hold the latch and remove it after disconnecting the connector. Insert the attachment of the flexible cable of the new lock into the latch, test its operation and put it back in place by securing it with its screws and inserting the connector, insert the lock into its housing and put the grille back in place.

Posted on 3 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford C Max (2010-2019 / MK 2) If one of the front headlight lamps of the Ford CMax were to burn out, we will replace it as quickly as possible to be able to drive safely. To perfo…
Ford C Max (2010-2019 / MK 2) In this video, you will learn where to find the fuse box in the Ford C-Max 2010. Open the engine compartment bonnet and look to the far right of the …
Ford C Max (2010-2019 / MK 2) In this video, see how to install dynamic indicators on the side mirrors of a Ford C-Max, replacing the traditional direction indicators. Using the a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos