Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Dynamic Indicators on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Side marker bulb

In this video, see how to install dynamic indicators on the side mirrors of a Ford C-Max, replacing the traditional direction indicators. Using the appropriate controls, move the rearview mirror inwards, then pry the clip that holds the indicator lens until it releases. To remove it completely, take out the bulb holder. Remove the old bulb and insert the electrical connector for the dynamic indicator in its place, push everything inside the mirror, and position the indicator lens in its housing until it locks.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulbs of the Ford CMax MK2.
Replacement of the front headlight bulbs of the Ford CMax MK2.
Ford C Max (2010-2019 / MK 2) If one of the front headlight lamps of the Ford CMax were to burn out, we will replace it as quickly as possible to be able to drive safely. To perfo…
Where to Find the Fuse Box in the Ford C-Max 2010
Where to Find the Fuse Box in the Ford C-Max 2010
Ford C Max (2010-2019 / MK 2) In this video, you will learn where to find the fuse box in the Ford C-Max 2010. Open the engine compartment bonnet and look to the far right of the …
Where is the Fuse Box on the Ford C-Max 2017
Where is the Fuse Box on the Ford C-Max 2017
Ford C Max (2010-2019 / MK 2) The electric fuse is a device that protects a circuit from overcurrents. The fuse consists of a cartridge, through which a thin conductor wire passes…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos