Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Side mirror

Today you will discover the steps to remove and replace the external wing mirror on a Ford C-Max. First, open the front door of the vehicle and start by removing the plastic cover behind the wing mirror; then unscrew the securing screws for the mirror and disconnect the electrical connector, as shown in the video. At this point, pull the wing mirror out from the outside, replacing it with the new one; secure it properly and finally adjust the wing mirror, refitting the internal plastic cover.

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Ford C-MAX?
How to Replace the External Wing Mirror on the Ford C-MAX?
Ford C Max (2003-2010 / MK 1) As seen in this tutorial, replacing the external wing mirror on the Ford C-MAX MK1 is a very simple and quick operation. First, open the door, remove…
Where is the External Temperature Sensor on a Ford C-Max?
Where is the External Temperature Sensor on a Ford C-Max?
Ford C Max (2010-2019 / MK 2) The external temperature sensor on a Ford C-Max is located inside the external rear-view mirror on the passenger side. The sensor can be found at the…
How to replace the external rearview mirror of the Ford C MAX
How to replace the external rearview mirror of the Ford C MAX
Ford C Max (2010-2019 / MK 2) In case of breakage, it will be necessary to replace the external mirror of the 2011 Ford C Max, this operation is easily achievable independently. L…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos