Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulbs on a Ford C-Max MK2

Model: Ford C Max MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

If one of the front headlight bulbs on your Ford C-Max burns out, replace it as soon as possible for safe driving. To replace the bulb, open the bonnet and stand in front of the headlight containing the bulb to be changed.

Use a Torx30 screwdriver to remove the screw securing the headlight, then pull it out and rotate it to access the rear. Press the four clips to open the cover, disconnect the bulb connector, release the metal wire clip, and remove the burnt bulb.

Insert the new bulb. Refit the cover, position the headlight back in its place, and secure it with the screw.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

Installing Dynamic Indicators on a Ford C-Max
Installing Dynamic Indicators on a Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, see how to install dynamic indicators on the side mirrors of a Ford C-Max, replacing the traditional direction indicators. Using the a…
Where is the Fuse Box on the Ford C-Max 2017
Where is the Fuse Box on the Ford C-Max 2017
Ford C Max (2010-2019 / MK 2) .. the function of fuses, in the case of the Ford C-Max MK2, there are three fuse boxes: one in the cabin, on the passenger side, under the glove compartment;.. …
Where to Find the Fuse Box in the Ford C-Max 2010
Where to Find the Fuse Box in the Ford C-Max 2010
Ford C Max (2010-2019 / MK 2) In this video, you will learn where to find the fuse box in the Ford C-Max 2010. Open the engine compartment bonnet and look to the far right of the …

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos