Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Ford C-Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Light bulb

To replace the rear light bulb on a Ford C-Max, open the tailgate to access the side plastic cover in the boot. By removing this cover, you will be able to access the screws that secure the entire light unit from the inside. The light unit can then be extracted from its housing, disconnecting the connector as well. At this point, you can remove the bulb from inside the light and replace it with a new spare part. After the replacement, reattach the light unit with its screws.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Ford C-Max
How to Replace the Rear Light Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Before starting, open the tailgate of your Ford C-Max. Begin by unclipping and removing the inner cover near the rear light. After doing this, unscre…
How do you replace the rear headlight bulb of the Ford C-Max?
How do you replace the rear headlight bulb of the Ford C-Max?
Ford C Max (2010-2019 / MK 2) The replacement of the rear headlight bulb on the Ford C-Max is done by opening the rear hatch, so that it is possible to access the inner trim panel…
How to Change the Rear Light and Bulb on a Ford C-Max
How to Change the Rear Light and Bulb on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Removing the rear light from your Ford C-Max is not a complicated task; with a bit of care, you can do it without too much trouble. Open the rear hat…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos