Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlamp on a Ford C Max

Model: Ford C Max MK 2 - Years 2010-2019
Part: Headlight

Replace the front headlamp on a Ford C Max. Open the bonnet by pulling the release lever and secure it. Unscrew the securing screws above the headlamp using a socket or battery-powered screwdriver. Disconnect the power connectors. At this point, detach the bulb holder from the headlamp and remove the headlamp from the vehicle body. Fit the new headlamp with new bulbs if damaged (always ensure the correct type and size) and insert the headlamp into its housing. Finally, tighten the headlamp screws with the socket wrench. Test the correct operation of the lights on the C Max.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Bulbs from the Front Headlight on a Ford C Max
Removing the Bulbs from the Front Headlight on a Ford C Max
Ford C Max (2003-2010 / MK 1) Removing the blown bulbs from the front headlight on a Ford C Max, start by removing the front headlight. Open the bonnet by pulling the bonnet relea…
How to Replace the Front Headlamp Bulb on a Ford C-Max
How to Replace the Front Headlamp Bulb on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Before starting, open the bonnet of your Ford C-Max. Begin by unscrewing and removing the screws that secure the front headlamp to the frame. Next, p…
Replace Front Headlight Bulbs on Ford C-Max
Replace Front Headlight Bulbs on Ford C-Max
Ford C Max (2010-2019 / MK 2) Need to change the front headlight bulbs because they are damaged? Here’s how to remove them on a Ford C-Max. Open the front bonnet by pulling the le…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos