Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the front headlight bulb on the Ford C-Max MK2

Model: Ford C Max MK 2 - Years 2010-2019
Part: Headlight bulb

In this video, we will see the procedure to remove and replace the front headlight bulb on the Ford C-Max second series, from 2014, in simple steps. First, open the bonnet and start by removing the upper plastic cover of the headlight. Then, unscrew the side screws of the headlight to detach it, thus gaining access to the bulbs. At this point, remove the plastic covers to access them; disconnect the electrical connector and extract the old bulb, replacing it with the new one (of the correct type); then refit the headlight!

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlight of the Ford C-Max
How to Remove the Front Headlight of the Ford C-Max
Ford C Max (2003-2010 / MK 1) Below are the instructions that will allow you to remove and replace the front headlight and its bulbs on the Ford C-Max. First, open the bonnet of y…
How to remove the front headlight of the Ford C-Max.
How to remove the front headlight of the Ford C-Max.
Ford C Max (2003-2010 / MK 1) This brief guide will show us the steps to disassemble and possibly replace the front headlight of the Ford C-Max. First, let's open the vehicle's ho…
How to Replace the Rear Light Bulbs on a Ford C-Max
How to Replace the Rear Light Bulbs on a Ford C-Max
Ford C Max (2010-2019 / MK 2) Below are the steps to remove and replace the rear light bulbs on a Ford C-Max. First, open the rear hatch of the boot and start removing the plastic…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos