Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Headlight Bulb on a Ford Escape

Model: Ford Escape MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

If you need to replace a headlight bulb on this vehicle model, follow the instructions below for a proper replacement. After raising the hood, locate the headlight assembly where the bulb is situated.

Unscrew the bulb, then disconnect the electrical connector. Take the new bulb, insert it into its housing in the headlight, and screw it back in. Finally, reconnect the power connector and replace the rubber cover.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb on a 2014 Ford Escape
How to Replace the Headlight Bulb on a 2014 Ford Escape
Ford Escape (2013-2019 / MK 3) If you are wondering how to properly replace the headlight bulb on your 2014 Ford Escape, follow the steps outlined in this guide. First, completely …
How to Replace the Headlight Bulb in a Ford Escape
How to Replace the Headlight Bulb in a Ford Escape
Ford Escape (2008-2012 / MK 2) To replace the headlight bulb in a Ford Escape, open the hood to access the back of the headlight corresponding to the bulb to be replaced. Remove th…
How to replace the front headlight bulb of the Ford Escape
How to replace the front headlight bulb of the Ford Escape
Ford Escape (2013-2019 / MK 3) Today we will explain how to replace the front headlight bulb on a Ford Escape produced from 2013 to 2019. Replacing the bulb is a simple and quick o…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos