Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats of the Ford Focus MK3

Model: Ford Focus MK 3 - Years 2011-2018
Part: Seat

Today, with the help of this short video tutorial, you will learn the steps to remove the front seat of the Ford Focus MK3, produced from 2011 to 2018. The first step before removing the seat is to disconnect the airbag connector to prevent the airbag from deploying during disassembly. Once you have disconnected the connector, as shown in the video, remove the seat securing bolts. To remove the four securing bolts located on the floor of the car, you will need a Torx key of 50 mm. After removing the bolts, take off the headrest and extract the seat.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats of the Ford Focus
How to remove the rear seats of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this short and simple guide, we will see how to disassemble the rear seats of the Ford Focus, following the instructions below. First, open the re…
How to Lower the Rear Seats of the Ford Focus?
How to Lower the Rear Seats of the Ford Focus?
Ford Focus (2011-2018 / MK 3) To lower the rear seats of the Ford Focus, lower the levers located on the side of the rear seatbacks: these levers are situated on the outer side of…
How to remove the headrests of the Ford Focus
How to remove the headrests of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this guide, we will see the instructions that will allow us to remove the headrests of the seats of the Ford Focus. First, we open the rear door o…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos